Last week I performed a little Ikea hack on my dining room Ikea Jokkmokk table. My initial idea was to remove the legs, replace them with hairpin legs, then sand and re-stain the top.
I will admit, I often have grand diy ideas but my execution often doesn't pan out. I am happy to say that this time around, everything worked perfectly. My table turned out better than I could have imagined and I absolutely LOVE it. Plus the whole hack was SO simple....just a few easy steps.
Remove legs and trim - just a few screws.
I used this $30 Black & Decker sander and the stain I chose was RustOleum Sunbleached.
I bought hairpin legs from this shop on eBay for $50 and screwed them to each of the four corners. I placed each one about an inch in from the edge.
Ta-da!
That is all I did. Besides drying time in between the two coats of stain, this whole project took less than an hour. I love when projects are super simple and produce big results.
I think it looks SO much better and my favorite part is that I now have an original table.
This looks great!
ReplyDeleteCould one skip the Jokkmokk table and use a GERTON
ReplyDeleteTable top (http://www.ikea.com/us/en/catalog/products/50106773/) for $80?
yes, of course! you can use any table top...I just used the Jokkmokk table because I already had it and didn't want to buy anthing new :).
DeleteThis comment has been removed by the author.
ReplyDeleteHi - I'm in love with the chairs! Where are they from? :)
ReplyDeletethanks anna! I got them at a consignment store for $2 each. They are old high school cafeteria chairs that I spray painted.
DeleteHi! I love what you've done with the table, it's so awesome! I have a question about the stain - I also have an orangey wood piece that I'd like to stain and sand (similar to what you did) and I'm wondering if you found that the Ikea wood was actually much lighter in color or if the sunbleached stain actually changed the original orangey finish to that beautiful color?
ReplyDeleteMorgan @ PepperDesignBlog.com
Hi morgan - When I sanded the wood, there was little color left so the stain easily took to the wood. If I had not sanded, I don't think the result would have been the same.
DeleteHi Deb - I like the metal on the legs. The original plastic on the chairs was a gross color so I was eager to change that!
ReplyDeleteFantastic tutorial - very helpful! I got a question for you, what is the height and diameter of the hairpin legs you used? I am planning to do the same and I am just worried about the how strong these hairpin legs are.
ReplyDeletethanks! the height of the legs is 29". Not sure about the diameter....The legs are very strong. I assume the larger the diameter, the stronger they are.
Deletegina,
ReplyDeletequestion? what did you do with the chairs? I want to do this with my table, but keeping the chairs?? hmm I was inspecting them and the might look cute covered in some retro slip covers.
I kept the chairs in their original condition. They are actually back at the table now and the cute gray and turquoise ones have been moved to other places. My husband didn't like the gray and turquoise ones....it is a little annoying that he is a man with an opinion :).
DeleteI think slip cover would look good!
Great project-I love personalized furniture :)
ReplyDeleteThe table looks like a coffee table now, only taller. The hairpin legs are cute, they really made your table originally yours! I just want to know what color you used for it? And have you tried to do it at least one of its chairs?-Allison
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteI absolutely love this! I have this exact same table and I can't wait to try something like this.
ReplyDeleteLove the table hack. Hairpin legs are the best. I have a question about your spray painted chairs. I know you don't have them there at the table any more (boo, hiss to husbands with decor opinions ... I have one of those too). But I was wondering how well the paint job holds up as they are used. Did you use basic spray paint? I've been thinking of spray painting my stools but I would guess they would get all scratched up from rivets on jeans, etc.
ReplyDeleteLove this idea! Do you happen to know another affordable source for the hairpin legs? The store you suggested on eBay no longer exists. Thanks!
ReplyDeleteHmm, no not sure. I would suggest just searching around on ebay or etsy. Thanks!
DeleteHi, is a support beam needed in the middle portion of the wood slab ( to prevent wobbling, if any?). Im planning to use the hairpin legs with some found wooden slabs :). thanks!
ReplyDeleteAndri
hi there! No, I did not use a support beam. The table is a little bit wobbly - but it isn't too bad. I am sure a support beam wouldn't hurt :).
DeleteThanks for the reply Gina. Happy New Year to you.
DeleteAndri
Hey Gina
ReplyDeleteJust about to do this project, but am not sure what to do with the original chairs. Did you end up staining them as well?
I actually just bought new chairs - and left the original ones as is. Have fun with your ikea hack!
DeleteI was just looking for new kitchen table ideas and this crossed my reader! Love it. I'm about to go buy the table used from someone (lucky again)- any special tools you needed to get the legs off?
ReplyDeleteHi Kat- Nope, just a screw driver and maybe a hammer to knock the old legs out of place :).
DeleteThanks! I've got the table all disassembled. Two more questions- do you think it's really necessary to use an electric sander, or would a little more time work with sandpaper by hand? Did it take alot for the existing varnish to come off? And, I couldn't find "sunbleached" anywhere, so I'm going to experiment with "driftwood", any thoughts? It seems pretty gray.
DeleteHi Kat! No, it isn't necessary to use an electric sander. I own one and it's easier to use one on larger projects like this, but you could easily do this sanding by hand. The existing varnish on the table isn't that thick and just a light sanding worked for me! As far as the stain goes, the one I used was pretty gray too. I put on a light layer, let it sit for a few seconds and then wiped it with a soft cloth. This gave the wood a very light coating of gray, which is what I wanted. If you want a darker gray color, allow the stain to soak into the wood for about 5-10 minutes. and, you can always do a second coat. My motto is to go light at first and if I want it darker, I can always do more coats. Good luck!
DeleteI'm in love with the teal chairs. Are they IKEA too?
ReplyDeleteHi Theora - No! I got them at a thrift store. They are old school cafeteria chairs and I spray painted them :).
DeleteLove this!! Such a beautiful color wood now. Great job. I have a question- did the sanding get the finish off of the Ikea wood? I have a dresser from Ikea that is pine, looks similar. I'm hoping the sanding gets that glossy feeling finish off of it so I can stain it. Thanks :)
ReplyDeleteHi Talia-
DeleteYes, the sanding easily took off the stain. Certain Ikea furniture is covered in a laminate and that will require a primer before painting. But, other pieces are just wood covered in a stain. The ones that are stained are (in my experience) easy to remove. Good luck!
Hey
ReplyDeleteI LOVE this project and I'm about to do the same, I have one question though.. How is the texture of the table now? is it smooth, or would you recommend to lacquer it in the end?
wow, I have the same IKEA table and you have just inspired me enormously!
ReplyDeletethanks,
Bipasha
Do you still have the original wooden legs for the table? If you do could you sell me one or two? thanks!!!
ReplyDeleteI am obsessed with your area rug!! I have been in the market for something similar without much luck. Do you know the brand/manufacturer?
ReplyDeleteSeriously.. many thanks for starting this up. I love reading through a post that will make men and women think. Also, thanks for allowing me to comment!
ReplyDeletereplacement metal crate pans
Love this idea! I have this exact same table so I'm excited to try it. What type/size screws did you use to attach the legs to the table?
ReplyDeleteHi! Did you have any issues with the table warping or bowing a few months after it was completed?
ReplyDeleteFor purchasing furniture through random stores is difficult. Its because of some obvious reasons like lack of collections,common designs and poor quality. Sometimes the dealers misbehaves with customers. Best place to buy furniture online could be the better option. Take a visit.
ReplyDeleteشركات مصاعد في مصر تعتبر شركة مصر للمصاعد لدينا طاقم مشرف من المهندسين ذوي الخبرة والكفاءة والقدرة على تنفيذ أي جدول يقترحه المالك.
ReplyDeleteHowever, let's get back to the fantastic IKEA hack. The step-by-step guide provided here is incredibly helpful for anyone looking to revamp their furniture on a budget. I appreciate the blogger's attention to detail, as it allows readers to follow along and potentially create their own one-of-a-kind pieces.
ReplyDeletezeus network promo code
This blog is a goldmine of information. Every paragraph is brimming with knowledge, and I found myself learning something new with each sentence. The writer's dedication to quality content is truly praiseworthy.
ReplyDeletesewdaily coupon
I've shared articles from this blog with my colleagues during team meetings, and it's led to some of the most engaging discussions we've had. It's incredible how a well-written piece can stimulate productive conversations.
ReplyDeletehttps://www.tryvoucher.com/quiksilver-discount-code
This blog is an amazing such a worthy to read this, the writer has done a wonderful job. the parking spot promo code
ReplyDelete